Rotary Laser Level For Grading in Construction

A rotary laser level for grading is a device used in construction to determine whether horizontal or vertical surfaces or other construction points are levels by using laser light in a continuous 360-degree arc.

People involved in construction project a continuous light line on floors, walls, and other structures to be able to align different components to be mounted at the same height or to mark construction levels.

Once you know how to use a laser level, it's a helpful, valuable, indispensable tool.

Rotary laser level for grading reviews - leica vs spectra vs topcon
Rotary Laser Level for Grading in Action

Different Than Conventional Laser Levels for grading

Rotary laser levels are different from conventional laser levels for grading. The main difference is that rotary laser levels project their laser reference line in a 360-degree arc and not a straight line.

This enables it to be able to be used to project a reference line on all of a building project's walls or simultaneously on the ceiling and the floor of a space, instead of only on a single line plane.

Construction professionals who know how to use a laser level effectively can get more accurate measurements, have a better overall picture of the levels in an entire project faster, and save valuable time when doing construction projects.

The Best Rotary Laser Level for grading

For accuracy, efficiency, and effectiveness, it's important to use the best rotary laser level for grading possible. When trying to decide which of the laser levels is best suited for your needs, there are several things you should consider.

They include the accuracy of the laser level for grading, whether a red or green beam is better, whether should you get auto or manual laser levels, whether will it be used outdoor or indoor, do you need one that is self-leveling, is the line or point of the laser level bright and stable enough and what point or line size is best?

The best one will provide the accurate seamless leveling you need.

Rotary laser level for grading in construction 1

Best Rotary Laser Level - REVIEWS

Explore the Best Rotary Laser Levels For Your Business

Why Each Factor Matters?

Key elements of the laser level you choose can impact the quality of the work you get done. A green beam is brighter and easier to see than a red one and is better for large projects. Auto or self-leveling lasers give you a more accurate level line. A manual laser works well for smaller projects.

When working indoors, use a laser level that does not need electronic laser receivers. When working outdoors doing trenching or grading, use laser levels with an infra-red beam and a laser receiver.

Single-grade laser levels are reliable and accurate and well-suited for general building jobs.

A Leica laser level for grading is a good choice for tough work environments.

Rotary laser level for grading in construction 2

Leica Laser Level

Other Important Factors

Self-leveling lasers provide greater accuracy. Laser levels with some electronic self-leveling sensors like the Spectra ll300n laser level increase reliability and accuracy.


The beam's brightness makes the line or points easily recognizable from a distance.

The stability of the line is one way to identify a good laser level. The thinner the beamline the laser level produces, the more accurate measurements and markings made using it tend to be.

However, the line must be thick enough so that tracks can be marked at their center.

Rotary laser level for grading in construction 3

Self-Leveling Laser Levels

A Top Laser Level for grading

A self-leveling contractor-grade laser level is one of the top laser leveling tools in the industry. Many professionals like using it because this quality of self-leveling laser has the ability to automatically find as well as maintain the right level within a range that is specified.

Some of these lasers use a bubble vial in the construction. This allows you to simply perform a rough leveling and the contractor-grade laser level itself takes over and does the necessary fine leveling.

In some cases, all you have to do is set up the laser somewhat close to level and the self-leveling laser will level itself.

Laser Level Tripods

A laser level tripod is very important in order to create a stable surface and get an accurate reading when using laser levels. This three-legged stand plays an essential role in providing the foundation on which laser levels and many other types of leveling instruments are placed.

Whether the construction project calls for the use of rotary laser levels, builder's levels, dot laser levels, line laser levels, automatic levels, transit levels, or even torpedo laser levels, having a good tripod can help to ensure the laser levels and other leveling equipment will have a steady base on which to work.

Technological Advances

Laser levels are a tool that has had a major impact on the construction industry. Over the years, a number of technological advances have been made to it make it much more accurate, dependable, and reliable.

Builders and contractors whether working on s small project or a large one, indoors or out, rely on the new technologically advanced laser levels to make sure the surfaces on their projects are absolutely level. These days, the levels are used by attaching a laser beam projector to a tripod.

The introduction of the self-leveling laser level is another technological advancement that is of great benefit to the construction industry making their job easier and much more accurate.

How To Use A Laser Level For Grading?

Using a laser level is helpful for any type of construction project. It can be used to level the ground, concrete floors and to check dirt grades. It saves lots of time, is easy to set up, and using it to measure grades is fast and accurate.

To set up the laser level, put the tripod on a level surface. Push the 'on' button. Wait a few seconds for it to self-level and begin rotating. The laser beam will start spinning 360 degrees.

It will give a horizontal, level beam. The laser is accurate to within 1/8 of an inch for 100 feet. You can use it as a ground laser level if you are leveling foundations' sub-grade. Just find a spot to put the tripod and the laser level.

If the receiver beeps fast move it down. If it beeps slowly, moves the receiver up. A solid beep means the area is perfectly level.

What to Consider When Buying Laser Levels For Grading

Buying a laser level is easy. You can order a wide range of different brands and types online and have them shipped to your home or business within a few days.

Plus, you can even find them at many of the big box stores. While you may not find the brands that some professionals prefer, like Topcon, the big box stores do carry quality brands like DeWalt. And these stores have those good brands at affordable prices.

You can also get the top brands the professional construction contractors prefer that are easier to use and more accurate at specialty stores catering to construction industry professionals. They also carry tripods and grade sticks.

What is a Range?

The range is the amount a laser level varies because of its casing. In order to use a self-leveling laser properly, you must know its range. A laser level's range is listed on the packaging, the device, and its instructions. If a rotary laser's level is within 6 degrees, it produces a measurement with a beam that's within six degrees.

The laser leveler makes a sound or displays flashing light beams to indicate the device is beyond 6 degrees, is not level, and has failed. That means it will not produce accurate results and the surface it is being used to measure will not be perfectly level. That can lead to whatever you have built on it being unstable.

Using Rotary Laser Level Devices In Direct Sunlight

The rotary laser level device is designed to be used indoors. The rotating laser level devices produce lines that are easily visible indoor but may be difficult to see outdoors unless you wear laser enhancement eyewear.

When used outdoors in sunlight, the dots and lines are only visible from a very short distance away. Therefore, it is
not recommended you use rotary laser levels unless you have a receiver that projects the line or dot at the distance for which it is designed and without using appropriate laser enhancement eyewear or the line or dot would be nearly completely invisible.

Get More Information

If you need more information on rotary laser level devices, click on the articles below:

  1. Best Laser Level For Your Project
  2. How To Pick the Best Rotary Laser Level
  3. FAQ About Rotary Laser Level
  4. Rotary Laser Level Reviews

Articles will answer any questions you may have on laser-level devices. This will enable you to understand which laser level best meets your needs.

If you want to check out the product features, you can find a list of products below.

Questions?

CALL or TEXT ANYTIME

Click to call Pat or Daly Quinn

319-320-4982

Since 1967

Quinn Equipment, Inc. was founded in 1967 by Charles and Marjorie Quinn to represent manufacturers in the distribution of construction related products.
Our Story
Quinn Equipment
400 35th St.
Marion, IA 52302
319-320-4982

Product Search

[mailpoet_form id="3"]
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram